paaaain

Want to ask about strings, maintenance, amps, mics, or comparisons of different guitars or any music equipment? This is for all threads related to music equipment.

Moderators: onid41, jkanter

Post Reply
User avatar
filmdude100cms
DMBTabs.com Authority
Posts: 7909
Joined: Tue Jan 27, 2004 10:26 am
Location: University of Alabama

paaaain

Post by filmdude100cms »

i was restringing my guitar, and i was pushing the low e over so i could cut the end off so it wouldnt cut me if my arm toched it. and it stuck really far into my finger... hurt a minute, then i tried to play, (biiiiiiig mistake) hurts like hell now...

any way to make this heal faster or cut down on the pain?
User avatar
Ranting Thespian
DMBTabs.com Authority
Posts: 3163
Joined: Mon Sep 01, 2003 3:34 am
Location: Wisconsin

Post by Ranting Thespian »

yeah, go to the USS Enterprise and get a dermil regenerator
Yes, I am in a box
Image

-Ranting Thespian
User avatar
NJPearce22
DMBTabs.com Authority
Posts: 3785
Joined: Mon Jun 07, 2004 10:16 pm
Location: Albion, PA (home); Clarion, PA (school)

Post by NJPearce22 »

Don't cut the ends off all the way! Either leave a little and curl 'em or wiggle them around as clost to the post and they break off perfectly. I just did this yesterday while restringing. The wiggle thing breaks the string so there isn't any excess hanging up w/ sharp points. If I had a digital camera...I'd show ya what I mean.
~Nate
Image
User avatar
Seek Up9803
Posts: 85
Joined: Thu Jan 01, 2004 12:46 pm
Location: Pennsylvania

Post by Seek Up9803 »

Yup, I'm with you NJ. The wiggle-thingy works really well and just make sure that the strings are cut close enough or it'll cut you again... had that happen last week :evil: I bled everywhere; needless to say, I was not pleased, lol
Matt

"Dark clouds may hang on me sometimes, but I'll work it out" -DJM
User avatar
filmdude100cms
DMBTabs.com Authority
Posts: 7909
Joined: Tue Jan 27, 2004 10:26 am
Location: University of Alabama

Post by filmdude100cms »

well i was using needle nose pliers, but the tip was too close to the machine, so i had to push it, thats when it stuck in.
User avatar
NJPearce22
DMBTabs.com Authority
Posts: 3785
Joined: Mon Jun 07, 2004 10:16 pm
Location: Albion, PA (home); Clarion, PA (school)

Post by NJPearce22 »

Ya gotta' use the needle-noses to get as close as possibl and wiggle that thing till it falls off!
~Nate
Image
User avatar
filmdude100cms
DMBTabs.com Authority
Posts: 7909
Joined: Tue Jan 27, 2004 10:26 am
Location: University of Alabama

Post by filmdude100cms »

yes thats what i was doing, it was too close to the tuner so i had to move it, and again, thats when it happend.
Post Reply